raise of robot

I did attach 4 arms, motors and legs to motherboard and now basic framework is done.

I`m still thinking where should be front and were rear part of drone. As for now I have front part located between 2 red arms. Many peoples are doing the same but it looks little different with the reference DJI drone presented on WIKI pages. Base on WIKI pages front side should be opposite to power wires. I like my direction much better then reference so I will stay with this approach.
Also I have some concerns related motors and how I did attached them. There are 2 clockwise and 2 counter clockwise motors and I hope I connected it well now. But of course I can change this very quickly.

Ok, so now framework stands on legs … and look like this :